中華電信的人剛裝機好的時候，預設這台機器的IP位置會是192.168.1.1，只要在瀏覽器輸入即可連到登入畫面。
帳號輸入cht
密碼輸入207w****，後四碼的****為機器上的MAC末四碼。
登入後先去防火牆－＞MCL把WEB(HTTP)、WEB(HTTPS)改成LAN。
改好之後至NAT->Port Forwarding 新增開放80、443兩個port，新增時會叫你選Interface，可參考WAN Service->Routed，看看你是哪個介面有出現PPPoE，我這裡的案例是ip1。
選好Interface之後，將外部端口設定為80 to 80、區域網路IP位址設定為你NAS的區網IP，內部端口一樣設定80，這樣未來由外網連入的80 port請求都會送到NAS去做處理。
NAT->NAT Loopback不知為何要打開，就照做。
設定完之後可到 Network Tools by YouGetSignal.com 測試你的80 port、443 port是否能連接。
到這邊，中華電信數據機的設定就結束了。接下來我們可以開始到NAS上進行後續的設定。
Great post and right to the point. I don’t know if this is in fact the best place to ask but
do you folks have any ideea where to get some professional writers?
Thanks in advance 🙂 Escape rooms hub
Very interesting details you have mentioned, thank you for
posting.!
This is the right blog for anyone who wishes to understand this topic. You understand a whole lot its almost tough to argue with you (not that I actually would want to…HaHa). You definitely put a brand new spin on a topic that has been written about for ages. Excellent stuff, just wonderful!
Good day! Do you use Twitter? I’d like to follow you if that would be okay. I’m absolutely enjoying your blog and look forward to new posts.